Shop
Salcon 4440 Double IC Keltron Sanyo (049)
₹899.00 Excl. TaxAbout this item:
- Power Output: 19+19 Watt
- Power Input: 12 V DC
- Inbuilt: PRE-AMP (bass & Treble), 5v Supply
- Easy to Install
Salcon 4440 Double IC Philips China (012)
₹499.00 Excl. TaxAbout this item:
- Power Output: 19+19 Watt
- Power Input: 12 V DC
- Inbuilt: 5 V Supply
- Use: DIY Kit
- Easy to Install
Salcon 4440 Double IC Keltron Sanyo (009)
₹799.00 Excl. TaxAbout this item:
- Power Output: 19+19 Watt
- Power Input: 12v DC
- Component: 4440 Double IC Keltron Sanyo
- Inbuilt: PRE-AMP (Bass & Treble), Presets Embedded, 5v Supply
- Use: Home Audio, Auto Rickshaw, Car, Vehicles, Etc
- Easy to Install
Salcon 4440 Double IC Economy China (027)
₹449.00 Excl. TaxAbout this item:
- Output: 19+19 Watt
- Input: 12v to 18v (Max) DC
- Type: Stereo
- Inbuilt: 5v Supply
- Component: 4440 Double IC
- Dimension: 5L x 12.5W x 2.5H cm.
- Use: Audio Amplifier
- Easy to Install
Salcon Low Pass Filter for Subwoofer (161)
₹149.00 Excl. TaxAbout this item:
- Extracts low frequencies for further processing. Passive
- 12db filter, Pass band 30 Hertz to 150 Hertz. Inbuilt presets sets gain
- Power supply 12-0-12 , 500 ma
- Audio Input: Single sound track or dual track
- Audio Output: Single sound track
Salcon 2N2955 2N3055 Transistor Board Kit (176)
₹949.00 Excl. TaxAbout this item:
- Good Bandwidth. The range of frequency that an amplifier can amplify properly is called the bandwidth of that particular amplifier
- Good Gain. Gain of an amplifier is the ratio of output power to the input power. It represents how much an amplifier can amplify a given signal
- Better Efficiency. Efficiency of an amplifier represents how efficiently the amplifier utilizes the power supply.
- Good Stability. Stability is the capacity of an amplifier to resist oscillations. These oscillations may be high amplitude ones masking the useful signal or very low amplitude
- Input Supply : 24-0-24, 5-6 Amp Transformer
Salcon Bass Treble Control Assembled 12v Single Supply (106)
₹350.00 Excl. TaxAbout this item:
- This is an optimized version of the passive preamplifier tone board, the circuit uses the optimized version of the high and low tone adjustment circuit, the sound is rich in details.
- Passive design, no ground loop at the end and independent design with shielded ground with audio signal ground completely separated, the clutter will not chaos string
Salcon TDA7388 160w 4 Channel Board (112)
₹500.00 – ₹550.00Price range: ₹500.00 through ₹550.00 Excl. TaxAbout this item:
- Power Output: 40+40+40+40 Watts
- Power Input: 12v to 18v DC, 3 to 10 amp
- Type: 4 Channel Amplifier Board
- Component: TDA7388 Single IC
- Use: Home Audio, Auto RickShaw, Vehicles, Etc
- Easy to Install
Select options
This product has multiple variants. The options may be chosen on the product page
7294 200 watts RMS Stereo/Mono Board(182)


Salcon Hi-Fi 1000W 4 Mosfet with Bass Treble Board (238)
₹799.00 Excl. TaxAbout this item:
- Original Toshiba Japan 5200 1943 Mosfet
- Input Supply : 30-0-30, 7 Amp + 0 12, 1 Amp.
- Input sound : Two channel stereo Output sound : Two channel stereo
- 100 + 100 Watt Sound Output
- Built-in Preamp and Bass treble Board
Salcon 150w Stereo 5.1 Home Theatre Board w/2030 (163)
₹449.00 – ₹489.00Price range: ₹449.00 through ₹489.00 Excl. TaxSpecifications:
- 150 watts 5.1/3.1 Home theatre amplifier board
- TDA 2030 IC based for hi-fi sound
- 2 x 4458 IC, 1st to bridge two 2030IC for subwoofer and 2nd for low pass filter ( bass )
- Input sound: 2 channel / Output sound: 4 channel 3. 1 or 5. 1 channel stereo
- Subwoofer 1 channel upto 6 inch – 8inch
- 3 channel for Left Right and Centre
- Note : 5. 1 decoder board not required as it only takes stereo channel
Select options
This product has multiple variants. The options may be chosen on the product page
Salcon 500w True RMS Mono Pro Series (111)
₹1,799.00 Excl. TaxAbout this item:
- Type: Mono
- Power Output: 500 Watt
- Power Supply: 45-0-45v DC to 75-0-75v DC (8 to 10 Amp)
- Component: TTC5200/TTA1943
- Use: 12 to 15 Inch & Home Use
- Easy to Install
Salcon 4 Mosfet Audio Board Stereo 200w (186)
₹499.00 Excl. TaxAbout this item:
- Type: 4 Trans Flat Stereo Audio Board
- Power Output: 100+100 Watt
- Power Input: 35-0-35v DC (5amp)
- Component: TTC5200/TTA1943
- Easy to Install
Salcon TKR 2 Mosfet Mono TTC5200/TTA1943 Board (119)
₹449.00 Excl. TaxAbout this item:
- Type: TKR 2 Mono
- Power Output: 100 Watt
- Power Input: 24-0-24v to 35-0-35v DC (5amp)
- Component: TTC5200/TTA1943
- Use: Bus, Truck, Tractor, Tempo, Auto Rickshaw & Home Audio
- Easy to Install
Salcon 5.1 Home Theatre Prologic Module (173)
₹799.00 Excl. TaxAbout this item:
- 5.1 Input/2.1 Input ( by selection switch), Power input 12 0 12 dual supply 1 amp
- Master Volume included in one board on other board you have to add all controls
- It is a passive preamp and so amplifier for all 6 channel must need to connect
- We also provide transformer with 2 separate output for Prologic 12-0-12 and 0-20 for main 5.1 audio board. Both output in single transformer
- Board only can also be used for the purpose of Subwoofer Out, Surround Out and L R out with built-in Bass Treble
Salcon 2.1 Home Theatre 2030A Stereo Amplifier Board (165)
₹249.00 – ₹339.00Price range: ₹249.00 through ₹339.00 Excl. TaxAbout this item:
- Salcon Electronic’s Three 2030A IC 2030Transistor based Stereo Amplifier Board for Home theatre use.
- High power up to 100 watts output (depends on Input supply power, min requirement is 2 amp recommended 3 amp)
- The best part about the kit is that it is made of individual components, which means if any thing goes wrong it can be easily serviced and components can be replaced. Simply need to add a Transformer and it will work.
- 3 x 2030A Transistor is a 2.1 channel audio power amplifier with in-built dual channels which enables for stereo and bridge amplifier applications.
- Input Supply : 12 v – 16 v. 3 Amp (12-0-12 ). 5 volt out cab to be obtained from 7805 IC in case anyone wants to connect FM, USB panel kit.
Select options
This product has multiple variants. The options may be chosen on the product page
Salcon 3 way Power track Bass Treble Board (178)
₹199.00 Excl. TaxAbout this item:
- Bass, Treble
- Mid to adjust between singer voice and instrumental
- Volume, Left Right Balance
- Loudness for bass boost
- Power 12 0 12 to 24 0 24 dual supply
Salcon BT Jhankar Board (196)
₹150.00 Excl. TaxAbout this item:
- Bass, Treble
- Mid – to adjust between singer voice and instrumental
- Volume – Left Right Balance
- Loudness – for Bass Boost
- Power – 12 0 12 to 24 0 24 dual supply
Salcon TKR 4440 Double IC Philips Without Head
₹500.00 – ₹800.00Price range: ₹500.00 through ₹800.00 Excl. TaxAbout this item:
- Output: 19+19 Watt
- Input: 12v to 18v (Max) DC
- Type: Stereo
- Component: 4440 Double IC
- Dimension: 5L x 12.5W x 2.5H cm.
- Use: Audio Amplifier
- Easy to Install
Select options
This product has multiple variants. The options may be chosen on the product page
Salcon 200w 2N3055 Transistor Board Kit (177)
₹549.00 Excl. TaxAbout this item:
- It is a upgraded version of 2n3055 circuit board with more power and sound quality
- Included Preamp Circuit for MIC, Fully assembled with MIC port, Preamp Circuit, exactly as in image.
- Premium quality circuit board, Made of Keltron best quality capacitor
- Input Supply 18-0-18 volt OR 24-0-24 , 5 Amp
- NOTE : Do not connect with 12-0-12 volt
Salcon 2 Way Crossover Filters Frequency Distributor (198)
₹250.00 Excl. TaxAbout this item:
- Divider is a circuit within the speaker device, different bands (treble, bass) sound signal to distinguish, respectively, to the amplification, and then sent to the corresponding band of speakers and then replay.
- Suitable for listening to music in the room, the keyboard and violin, guzheng, pipa, rain and so on, the voice of nature.
Vire VTF 108BT Bluetooth Module (122)
₹199.00 Excl. TaxFeatures:
- Support Bluetooth, USB, TF card, AUX
- Song number display
- Song selection mode
- Forward and backward selection
- IR Remote Control
- LED Display
- FM Radio from 87. 5 – 108 MHz
- External Antenna connection for FM
- Auto channel scan and save
- Support 5v voltage
- Panel size:106*25 mm
- Digital sound level display
- Sound Up /down buttons
- Distortion 2%
- Separation 50dB
- Output 550mv
- S/N 85dB
- Frequency response 70 Hz-15 kHz
- Bit Rate 32kbps-320kbps
- NOTE : DC INPUT 5V BE VERY CAREFUL AND APPLY 5V ONLY
Salcon 2 Channel 140 watts Audio Amplifier TKR (113)
₹499.00 Excl. TaxAbout this item:
- Input Supply : 12-0-12 v to 18-0-18 v, 4 – 5 Amp Dual Supply. Cooling Fan required on above 15 Volt
- Input sound : 2 channel stereo, Output sound : 2 channel stereo
- Up to 120 Watts Output Power, 94 dB Ripple Rejection Class: AB
- Use good quality bass treble board and Vire brand mp3 bluetooth module for quality sound
- Best choice to drive woofer up to 10 inch 200 watts
Salcon 4558 Bass Treble Control Preamp Board (194)
₹149.00 Excl. TaxAbout this item:
- This is an optimized version of the passive preamplifier tone board, the circuit uses the optimized version of the high and low tone adjustment circuit, the sound is detail rich
- Passive design, no ground loop at the end and independent design with the shielded ground. Audio signal ground completely separated, the clutter will not chaos string
- Net weight: 99.8 g